Netgear M4300-28G-PoE+ Managed 10G Ethernet (100/1000/10000) Power over Ethernet (PoE) 1U Black
Netgear M4300-28G-PoE+, IEEE 802.1x, IEEE 802.3ad, IEEE 802.3az, Managed, 10G Ethernet (100/1000/10000), 1U, Black, RJ-45
24x Gigabit PoE+ 550W PSU, SFP+, 10 Gigabit RJ45, 128 Gbps, VLAN, AXC761, AXC763
24x Gigabit PoE+ 550W PSU, SFP+, 10 Gigabit RJ45, 128 Gbps, VLAN, AXC761, AXC763
Safe and easy online payment
Fast delivery
Track your order via track&trace
Netgear M4300-28G-PoE+. Switch type: Managed. Basic switching RJ-45 Ethernet ports type: 10G Ethernet (100/1000/10000), Console port: RJ-45, Copper ethernet cabling technology: 10GBASE-T. Networking standards: IEEE 802.1x, IEEE 802.3ad, IEEE 802.3az. MAC address table: 16000 entries, Switching capacity: 128 Gbit/s, Throughput: 357 Mpps. Security algorithms: HTTPS, SNMP, SSH
The NETGEAR M4300 Stackable Switch Series delivers L2/L3/L4 and IPv4/IPv6 cost-effective services for mid-enterprise edge with full PoE+ and SMB core deployments with unrivalled ease of use: 10 Gigabit models can seamlessly stack with 1 Gigabit models within the series, enabling spine and leaf line-rate stacking topologies. Non-stop forwarding (NSF) virtual chassis architectures provide advanced High Availability (HA) with hitless failover across the stack. Dual redundant, modular power supplies equipping full width models contribute to business continuity management. Layer 3 feature set includes static, dynamic and policy-based routing - as standard. Perfect for wireless access, unified communications and IP video, the NETGEAR M4300 Switch Series is also ready for the future, with Software-defined Network (SDN) and OpenFlow 1.3 enabled for your network.
Best-in-class stacking
- M4300 is flexible enough for mixed stacking between 10 Gigabit and 1 Gigabit models, using any 10G port with any media type (RJ45, SFP+, DAC cables)
- High-availability is another key differentiator for stackable solutions: in case of a master switch failure, NSF and hitless failover ensure the standby switch takes over while forwarding plane continues to forward traffic on the operational stack members without any service interruption
Higher flexibility
- Two half-width M4300 switches can be paired in a single rack space for redundant Top of Rack installations with Auto-iSCSI prioritization
- 10 Gigabit ports are all independent and 1G backward compatible for progressive transition to 10G speeds
Lower complexity
- Entire feature set including L2 switching (multi-tiered access control) and L3 routing (static, RIP, OSPF, VRRP, PIM, PBR) is available without license
- DHCP/BootP innovative auto-installation including firmware and configuration file upload automation
Investment protection
- Line-rate spine and leaf stacking topologies offer multiple possibilities in server rooms, in branch collapsed cores or at the edge of growing networks
- Even if an organization is not ready for SDN, OpenFlow support offers future-ready design for maximum investment protection
Secure services
- With successive tiering, the Authentication Manager allows for authentication methods per port for a tiered authentication based on configured time-outs
- With BYOD, tiered Dot1x -> MAB -> Captive Portal authentication is powerful and simple to implement with strict policies
Industry standard management
- Industry standard command line interface (CLI), functional NETGEAR web interface (GUI), SNMP, sFlow and RSPAN
- Single-pane-of-glass NMS300 management platform with centralized firmware updates and mass-configuration support
Industry leading warranty
- NETGEAR M4300 series is covered under NETGEAR ProSafe Lifetime Hardware Warranty
- 90 days of Technical Support via phone and email, Lifetime Technical Support through online chat and Lifetime Next Business Day hardware replacement
The NETGEAR M4300 Stackable Switch Series delivers L2/L3/L4 and IPv4/IPv6 cost-effective services for mid-enterprise edge with full PoE+ and SMB core deployments with unrivalled ease of use: 10 Gigabit models can seamlessly stack with 1 Gigabit models within the series, enabling spine and leaf line-rate stacking topologies. Non-stop forwarding (NSF) virtual chassis architectures provide advanced High Availability (HA) with hitless failover across the stack. Dual redundant, modular power supplies equipping full width models contribute to business continuity management. Layer 3 feature set includes static, dynamic and policy-based routing - as standard. Perfect for wireless access, unified communications and IP video, the NETGEAR M4300 Switch Series is also ready for the future, with Software-defined Network (SDN) and OpenFlow 1.3 enabled for your network.
Best-in-class stacking
- M4300 is flexible enough for mixed stacking between 10 Gigabit and 1 Gigabit models, using any 10G port with any media type (RJ45, SFP+, DAC cables)
- High-availability is another key differentiator for stackable solutions: in case of a master switch failure, NSF and hitless failover ensure the standby switch takes over while forwarding plane continues to forward traffic on the operational stack members without any service interruption
Higher flexibility
- Two half-width M4300 switches can be paired in a single rack space for redundant Top of Rack installations with Auto-iSCSI prioritization
- 10 Gigabit ports are all independent and 1G backward compatible for progressive transition to 10G speeds
Lower complexity
- Entire feature set including L2 switching (multi-tiered access control) and L3 routing (static, RIP, OSPF, VRRP, PIM, PBR) is available without license
- DHCP/BootP innovative auto-installation including firmware and configuration file upload automation
Investment protection
- Line-rate spine and leaf stacking topologies offer multiple possibilities in server rooms, in branch collapsed cores or at the edge of growing networks
- Even if an organization is not ready for SDN, OpenFlow support offers future-ready design for maximum investment protection
Secure services
- With successive tiering, the Authentication Manager allows for authentication methods per port for a tiered authentication based on configured time-outs
- With BYOD, tiered Dot1x -> MAB -> Captive Portal authentication is powerful and simple to implement with strict policies
Industry standard management
- Industry standard command line interface (CLI), functional NETGEAR web interface (GUI), SNMP, sFlow and RSPAN
- Single-pane-of-glass NMS300 management platform with centralized firmware updates and mass-configuration support
Industry leading warranty
- NETGEAR M4300 series is covered under NETGEAR ProSafe Lifetime Hardware Warranty
- 90 days of Technical Support via phone and email, Lifetime Technical Support through online chat and Lifetime Next Business Day hardware replacement
| |
Switch type: | Managed |
Quality of Service (QoS) support: | |
Multicast support: | |
| |
Basic switching RJ-45 Ethernet ports quantity: | 2 |
Basic switching RJ-45 Ethernet ports type: | 10G Ethernet (100/1000/10000) |
SFP+ module slots quantity: | 2 |
Console port: | RJ-45 |
Copper ethernet cabling technology: | 10GBASE-T |
USB 2.0 ports quantity: | 1 |
| |
Networking standards: | IEEE 802.1x, IEEE 802.3ad, IEEE 802.3az |
DHCP server: | |
IP routing: | |
IGMP snooping: | |
10G support: | |
VLAN support: | |
Private VLAN: | |
| |
MAC address table: | 16000 entries |
Switching capacity: | 128 Gbit/s |
Throughput: | 357 Mpps |
Latency (10 Gbps): | 2.74 µs |
Number of VLANs: | 4096 |
| |
Security algorithms: | HTTPS, SNMP, SSH |
Access Control List (ACL): | |
SSH/SSL support: | |
BPDU filtering/protection: | |
| |
Rack mounting: | |
Form factor: | 1U |
Colour of product: | Black |
Ventilation fan(s): | 1 |
| |
Stackable: | |
Processor frequency: | 800 MHz |
Internal memory: | 1024 MB |
Flash memory: | 256 MB |
Noise level: | 39.8 dB |
Packet buffer memory: | 16 MB |
| |
AC input voltage: | 110-240 V |
Power supply included: | |
Power consumption (typical): | 577 W |
Power consumption (max): | 833.2 W |
Redundant power supply (RPS) support: | |
Number of power supply units: | 1 |
| |
Power over Ethernet (PoE): | |
Power over Ethernet plus (PoE+) ports quantity: | 24 |
Total Power over Ethernet (PoE) budget: | 480 W |
| |
Heat dissipation: | 196988 BTU/h |
| |
Weight: | 5.09 kg |
GSM4328PA-100NES
2024-05-24
Data sheet
- Rack mounting
- Yes
- Product colour
- Black
- 10G support
- Yes
- Power consumption (max)
- 833.2 W
- Processor frequency
- 800 MHz
- Access Control List (ACL)
- Yes
- VLAN support
- Yes
- Internal memory
- 1024 MB
- SSH/SSL support
- Yes
- Stackable
- Yes
- Power supply included
- Yes
- Weight
- 5.09 kg
- AC input voltage
- 110-240 V
- Console port
- RJ-45
- Flash memory
- 256 MB
- Multicast support
- Yes
- Basic switching RJ-45 Ethernet ports type
- 10G Ethernet (100/1000/10000)
- Power consumption (typical)
- 577 W
- DHCP server
- Yes
- Total Power over Ethernet (PoE) budget
- 480 W
- Redundant power supply (RPS) support
- Yes
- IGMP snooping
- Yes
- IP routing
- Yes
- USB 2.0 ports quantity
- 1
- MAC address table
- 16000 entries
- Power over Ethernet plus (PoE+) ports quantity
- 24
- Security algorithms
- HTTPS, SNMP, SSH
- Switching capacity
- 128 Gbit/s
- Latency (10 Gbps)
- 2.74 µs
- Number of power supply units
- 1
- Throughput
- 357 Mpps
- Private VLAN
- Yes
- Copper ethernet cabling technology
- 10GBASE-T
- Number of VLANs
- 4096
- BPDU filtering/protection
- Yes
- Networking standards
- IEEE 802.1x, IEEE 802.3ad, IEEE 802.3az
- Packet buffer memory
- 16 MB
- SFP+ module slots quantity
- 2
- Power over Ethernet (PoE)
- Yes
- Heat dissipation
- 196988 BTU/h
- Switch type
- Managed
- Ventilation fan(s)
- 1
- Quality of Service (QoS) support
- Yes
- Noise level
- 39.8 dB
- Form factor
- 1U
- Basic switching RJ-45 Ethernet ports quantity
- 2
Comments (0)
No customer reviews for the moment.